Programmer IC Internal Circuit SST25VF064C-80-4I-Q2AE-T 64 Mbit SPI Serial
SST25VF064C-80-4I-Q2AE-T 64 Mbit SPI Serial Dual I/O Flash
FEATURES:
• Single Voltage Read and Write Operations – 2.7-3.6V
• Serial Interface Architecture
– SPI Compatible: Mode 0 and Mode 3
• Dual Input/Output Support
– Fast-Read Dual-Output Instruction
– Fast-Read Dual I/O Instruction
• High Speed Clock Frequency
– 80 MHz for High-Speed Read (0BH)
– 75 MHz for Fast-Read Dual-Output (3BH)
– 50 MHz for Fast-Read Dual I/O (BBH)
– 33 MHz for Read Instruction (03H)
• Superior Reliability
– Endurance: 100,000 Cycles (typical)
– Greater than 100 years Data Retention
• Low Power Consumption
– Active Read Current: 12 mA (typical @ 80 MHz) for single-bit read)
– Active Read Current: 14 mA (typical @ 75MHz) for dual-bit rea
d)
– Standby Current: 5 µA (typical)
• Flexible Erase Capability
– Uniform 4 KByte sectors
– Uniform 32 KByte overlay blocks
– Uniform 64 KByte overlay blocks
• Fast Erase – Chip-Erase Time: 35 ms (typical)
– Sector-/Block-Erase Time: 18 ms (typical)
• Page-Program – 256 Bytes per page
– Single and Dual Input support
– Fast Page-Program time in 1.5 ms (typical)
• End-of-Write Detection
– Software polling the BUSY bit in Status Register
• Write Protection (WP#)
– Enables/Disables the Lock-Down function of the status register
• Software Write Protection
– Write protection through Block-Protection bits in status register
• Security ID
– One-Time Programmable (OTP) 256 bit, Secure ID
- 64 bit Unique, Factory Pre-Programmed identifier
- 192 bit User-Programmable
• Temperature Range
– Commercial = 0°C to +70°C
– Industrial: -40°C to +85°C
• Packages Available
– 16-lead SOIC (300 mils)
– 8-contact WSON (6mm x 8mm)
– 8-lead SOIC (200 mils)
• All devices are RoHS compliant
| PRODUCT DESCRIPTION |
MEMORY ORGANIZATION |
DEVICE OPERATION |
| The SST 25 series Serial Flash family features a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SST25VF064C SPI serial flash memory is manufactured with SST proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. |
The SST25VF064C SuperFlash memory array is organized in uniform 4 KByte erasable sectors with 32 KByte overlay blocks and 64 KByte overlay erasable blocks. |
The SST25VF064C is accessed through the SPI (Serial Peripheral Interface) bus compatible protocol. The SPI bus consists of four control lines; Chip Enable (CE#) is used to select the device, and data is accessed through the Serial Data Input (SI), Serial Data Output (SO), and Serial Clock (SCK). |
Product Tags:
|
|
Programmer IC Internal Circuit SST25VF064C-80-4I-Q2AE-T 64 Mbit SPI Serial Images
|
